Your cart is currently empty!.
You may check out all the available products and buy some in the shop.
Continue ShoppingMaster the Art of Product Setup with Our Step by Step installation guide.
Effortlessly set up your product with our comprehensive video tutorial and step-by-step guide. Designed for all skill levels, even the least experienced buyers, this guide ensures a smooth and enjoyable installation process—helping you get the most out of your purchase.
Welcome! This guide will walk you through the simple process of installing your new key hanger. Please read through the steps carefully before beginning. We’ve included instructions for both light-duty (up to 2 lbs.) and heavy-duty (up to 20 lbs.) mounting.
Package Content
Please verify that your package includes the following items
KK Hook Our signature key hanger.
Precision Mounting Template.
Premium Hardware Set.
KK Card with QR Code.
Tools You Need
- Phillips Screwdriver For securing screws during standard wall installation.
Hammer (if using anchors) Required only for heavy-duty mounting with wall anchors.
Level (optional but recommended) Ensures precise horizontal alignment for a polished, professional finish.
Mounting Type
Light-Duty Installation (Up to 2 lbs.) For hanging lightweight items (generally up to 2 lbs.), the included screws may be sufficient, depending on your wall material. No anchors required.
Heavy-Duty Installation (Up to 20 lbs.) For heavier items (up to 20 lbs.), we recommend using the provided wall anchors unless you’re certain the screws are secured directly into a wood stud. Anchors offer enhanced support, especially in drywall or plaster surfaces.
Installation Steps:
Step 1: Position the Template
Remove the Installation Template from the box and choose your desired mounting location. Hold the template flat against the wall and align its top edge horizontally.
Tip: Exact leveling isn’t critical at this stage, just aim for a roughly horizontal placement to simplify the next steps.
Step 2: Install the First Screw
- Locate the mounting marks on the template, typically shown as circles or crosses. Select one screw and position its tip directly over either the left or right mark. Carefully drive the screw through the template and into the wall, stopping when the screw head sits about ¼ inch (6mm) from the surface.
Step 3: Level and Insert the Second Screw
With the first screw in place, gently adjust the template until its top edge is perfectly horizontal.
Tip: For best results, use a level along the top edge, though it’s not strictly required.
Hold the template steady and position the second screw over the remaining mark. Carefully drive it into the wall, using the same method as before.
Once both screws are in place, remove the template to proceed with mounting.
Step 4: Anchor Installation ( If Not Secured Into Studs)
If you’re mounting into drywall, plaster, or are unsure whether the screws hit a stud, install the provided metal anchors to ensure full weight capacity.
Installation Steps:
Remove Screws Carefully unscrew and remove both screws from the wall.
Insert Metal Anchors Use the existing holes as pilot guides. Position the tip of each metal anchor into the hole and gently tap with a hammer until flush with the wall surface.
Reinstall Screws Drive the screws back into the installed anchors, stopping when the screw head sits about ¼ inch (6mm) from the wall surface.
Attention: Wall Type Matters
The KK Hook is engineered to support up to 20 lbs, provided it’s mounted correctly. Actual performance depends on your wall type, drywall, plaster, concrete, or wood.
If you felt strong resistance while driving both screws, they likely hit a wood stud or solid backing. In this case, anchors are not required—you may proceed directly to Step 5.
Step 5: Hang Your Premium Key Hanger
Whether you used anchors or screwed directly into studs, ensure both screw heads are protruding about 1/4 inch from the wall.
Locate the mounting slots (keyhole-shaped openings) on the back of your key hanger unit.
Align these slots over the protruding screw heads on the wall.
Gently press the key hanger against the wall and slide it down (or sideways, depending on the keyhole orientation) to engage the screws securely in the narrower part of the slots.
Ensure the hanger feels stable and secure on the wall.
🎥 For a visual walkthrough of the installation process, please watch the official KK Hook installation video
You’re All Set
Your KK Hook is now securely mounted and ready to elevate your space.
Enjoy the elegance, utility, and craftsmanship, every time you reach for your keys.